Wbadmin start backup

灰暗的星星灰暗的星星灰暗的星星灰暗的星星灰暗的星星
 

Applies To: Windows Server 2008, Windows Server 2008 R2, Windows Vista

Creates a backup using specified parameters. If no parameters are specified and you have created a scheduled daily backup, this subcommand creates the backup by using the settings for the scheduled backup. If parameters are specified, it creates a Volume Shadow Copy Service (VSS) copy backup and will not update the history of the files that are being backed up.

To create a one-time backup with this subcommand, you must be a member of the Backup Operators group or the Administrators group, or you must have been delegated the appropriate permissions. In addition, you must run wbadmin from an elevated command prompt. (To open an elevated command prompt, click Start, right-click Command Prompt, and then click Run as administrator.)

For examples of how to use this subcommand, see Examples.

Syntax
 
 

Syntax for Windows°Vista and Windows Server 2008:

 
 
wbadmin start backup
[-backupTarget:{<BackupTargetLocation> | <TargetNetworkShare>}]
[-include:<VolumesToInclude>]
[-allCritical]
[-noVerify]
[-user:<UserName>]
[-password:<Password>]
[-noinheritAcl]
[-vssFull]
[-quiet]

Syntax for Windows°7 and Windows Server 2008 R2:

 
 
Wbadmin start backup
[-backupTarget:{<BackupTargetLocation> | <TargetNetworkShare>}]
[-include:<ItemsToInclude>]
[-nonRecurseInclude:<ItemsToInclude>]
[-exclude:<ItemsToExclude>]
[-nonRecurseExclude:<ItemsToExclude>]
[-allCritical]
[-systemState]
[-noVerify]
[-user:<UserName>]
[-password:<Password>]
[-noInheritAcl]
[-vssFull | -vssCopy] 
[-quiet]
Parameters
 
 

 

Parameter Description

-backupTarget

Specifies the storage location for this backup. Requires a hard disk drive letter (f:), a volume GUID-based path in the format of \\?\Volume{GUID}, or a Universal Naming Convention (UNC) path to a remote shared folder (\\<servername>\<sharename>\). By default, the backup will be saved at: \\<servername>\<sharename>\WindowsImageBackup\<ComputerBackedUp>\.

ImportantImportant
If you save a backup to a remote shared folder, that backup will be overwritten if you use the same folder to back up the same computer again. In addition, if the backup operation fails, you may end up with no backup because the older backup will be overwritten, but the newer backup will not be usable. You can avoid this by creating subfolders in the remote shared folder to organize your backups. If you do this, the subfolders will need twice the space as the parent folder.

 

 

-include

For Windows°Vista and Windows Server 2008, specifies the comma-delimited list of volume drive letters, volume mount points, or GUID-based volume names to include in the backup. This parameter should be used only when the -backupTarget parameter is used.

For Windows°7 and Windows Server 2008 R2, specifies the comma-delimited list of items to include in the backup. You can include multiple files, folders, or volumes. Volume paths can be specified using volume drive letters, volume mount points, or GUID-based volume names. If you use a GUID-based volume name, it should be terminated with a backslash (\). You can use the wildcard character (*) in the file name when specifying a path to a file. Should be used only when the -backupTarget parameter is used.

-exclude

For Windows°7 and Windows Server 2008 R2, specifies the comma-delimited list of items to exclude from the backup. You can exclude files, folders, or volumes. Volume paths can be specified using volume drive letters, volume mount points, or GUID-based volume names. If you use a GUID-based volume name, it should be terminated with a backslash (\). You can use the wildcard character (*) in the file name when specifying a path to a file. Should be used only when the -backupTarget parameter is used.

-nonRecurseInclude

For Windows°7 and Windows Server 2008 R2, specifies the non-recursive, comma-delimited list of items to include in the backup. You can include multiple files, folders, or volumes. Volume paths can be specified using volume drive letters, volume mount points, or GUID-based volume names. If you use a GUID-based volume name, it should be terminated with a backslash (\). You can use the wildcard character (*) in the file name when specifying a path to a file. Should be used only when the -backupTarget parameter is used.

-nonRecurseExclude

For Windows°7 and Windows Server 2008 R2, specifies the non-recursive, comma-delimited list of items to exclude from the backup. You can exclude files, folders, or volumes. Volume paths can be specified using volume drive letters, volume mount points, or GUID-based volume names. If you use a GUID-based volume name, it should be terminated with a backslash (\). You can use the wildcard character (*) in the file name when specifying a path to a file. Should be used only when the -backupTarget parameter is used.

-allCritical

Specifies that all critical volumes (volumes that contain operating system's state) be included in the backups. This parameter is useful if you are creating a backup for bare metal recovery. It should be used only when -backupTarget is specified, otherwise the command will fail. Can be used with the -include option.

TipTip
The target volume for a critical-volume backup can be a local drive, but it cannot be any of the volumes that are included in the backup.

 

 

-systemState

For Windows°7 and Windows Server 2008 R2, creates a backup that includes the system state in addition to any other items that you specified with the -include parameter. The system state contains boot files (Boot.ini, NDTLDR, NTDetect.com), the Windows Registry including COM settings, the SYSVOL (Group Policies and Logon Scripts), the Active Directory and NTDS.DIT on Domain Controllers and, if the certificates service is installed, the Certificate Store. If your server has the Web server role installed, the IIS Metadirectory will be included. If the server is part of a cluster, Cluster Service information will also be included.

-noVerify

Specifies that backups saved to removable media (such as a DVD) are not verified for errors. If you do not use this parameter, backups saved to removable media are verified for errors.

-user

If the backup is saved to a remote shared folder, specifies the user name with write permission to the folder.

-password

Specifies the password for the user name that is provided by the parameter -user.

-noInheritAcl

Applies the access control list (ACL) permissions that correspond to the credentials provided by the -user and -password parameters to \\<servername>\<sharename>\WindowsImageBackup\<ComputerBackedUp>\ (the folder that contains the backup). To access the backup later, you must use these credentials or be a member of the Administrators group or the Backup Operators group on the computer with the shared folder. If -noInheritAcl is not used, the ACL permissions from the remote shared folder are applied to the <ComputerBackedUp> folder by default so that anyone with access to the remote shared folder can access the backup.

-vssFull

Performs a full back up using the Volume Shadow Copy Service (VSS). All files are backed up, each file's history is updated to reflect that it was backed up, and the logs of previous backups may be truncated. If this parameter is not used wbadmin start backup makes a copy backup, but the history of files being backed up is not updated.

CautionCaution
Do not use this parameter if you are using a product other than Windows Server Backup to back up applications that are on the volumes included in the current backup. Doing so can potentially break the incremental, differential, or other type of backups that the other backup product is creating because the history that they are relying on to determine how much data to backup might be missing and they might perform a full backup unnecessarily.

 

 

-vssCopy

For Windows 7 andWindows Server 2008 R2, performs a copy backup using VSS. All files are backed up but the history of the files being backup up is not updated so you preserve the all the information on which files where changed, deleted, and so on, as well as any application log files. Using this type of backup does not affect the sequence of incremental and differential backups that might happen independent of this copy backup. This is the default value.

WarningWarning
A copy backup cannot be used for incremental or differential backups or restores.

 

 

-quiet

Runs the subcommand with no prompts to the user.

Examples
 
 

The following examples show how the wbadmin start backup command can be used in different backup scenarios:

Scenario #1

  • Create a backup of volumes e:, d:\mountpoint, and \\?\Volume{cc566d14-4410-11d9-9d93-806e6f6e6963}

  • Save the backup to volume f:

 
 
wbadmin start backup -backupTarget:f: -include:e:,d:\mountpoint,\\?\Volume{cc566d14-44a0-11d9-9d93-806e6f6e6963}\

Scenario #2

  • Perform a one-time backup of f:\folder1 and h:\folder2 to volume d:.

  • Backup the system state

  • Make a copy backup so that the normally scheduled differential backup is not impacted.

 
 
wbadmin start backup –backupTarget:d: -include:g\folder1,h:\folder2 –systemstate -vsscopy

Scenario #3

  • Perform a one-time backup of d:\folder1 that should be backed up non-recursively.

  • Backup the folder to the network location \\backupshare\backup1

  • Restrict access to the backup to members of the Administrators or Backup Operators group.

 
 
wbadmin start backup –backupTarget: \\backupshare\backup1 -noinheritacl -nonrecurseinclude:d:\folder1

提交评论


安全码
刷新

 

自1996年以来,公司一直专注于域名注册、虚拟主机、服务器托管、网站建设、电子商务等互联网服务,不断践行"提供企业级解决方案,奉献个性化服务支持"的理念。作为戴尔"授权解决方案提供商",同时提供与公司服务相关联的硬件产品解决方案。
 

联系方式

地址:河南省郑州市经五路2号

电话:0371-63520088 

QQ:76257322

网站:800188.com

电邮:该邮件地址已受到反垃圾邮件插件保护。要显示它需要在浏览器中启用 JavaScript。

微信:用企业微信联系